Работаем с юридическими лицами, бюджетными организациями, ИП
По вопросам приобретения товара пишите на info@chiply.ru
RA Series Blade Resistor Heaters_x000D_
Rectangular finned resistors on stainless steel shielded tube._x000D_
Designed to heat air or gas by natural or forced convection._x000D_
Used in heater fans and static batteries, dryers and drying tunnels._x000D_
Minimum recommended air speed is 2.5m / s._x000D_
ACIM Jouanin Strip Heater_x000D_
The ACIM Jouanin flat bracket 750W strip heater is designed to heat air or gas by natural or forced convection. This blade resistor heater can be heated up to a peak temperature of 200°C._x000D_
Note:_x000D_
To obtain optimum performance from these products, it is advised that temperature sensing and control elements be used with them._x000D_
Warning:_x000D_
For reasons of safety the heater block and/or heater sheath must be bonded to earth_x000D_
Features and Benefits_x000D_
Minimum recommended airspeed is 2.5m/s_x000D_
Rectangular finned resistors on stainless steel shielded tube_x000D_
The supply voltage is 230VAC_x000D_
Strip Heating Elements_x000D_
Note_x000D_
To obtain optimum performance from these products, it is advised that temperature sensing and control elements be used with them_x000D_
Warning_x000D_
For reasons of safety the heater block and/or heater sheath must be bonded to earth_x000D_
Approvals_x000D_
UL Recognised; CSA Certified
Наш менеджер свяжется с вами в ближайшее время