RCF 630 Ceramic Heating Element, 1.15m, 630 W, 230 V ac

Cold-formed heating resistors_x000D_ Formable heating resistors can take on any shape after forming and may therefore be used to replace faulty specific resistors, or in a normal capacity on injection nozzles, sheaths and cylindrical parts._x000D_ The internal bend radius is 8 mm for the round sleeve and 7 mm for the square section._x000D_ The resistor must be formed to be slightly smaller than the part that will be heated, to ensure good contact._x000D_ The heating length must be determined according to the part to be heated._x000D_ A formed CFR may not be reformed._x000D_ Strip Heating Elements_x000D_ Note_x000D_ To obtain optimum performance from these products, it is advised that temperature sensing and control elements be used with them_x000D_ Warning_x000D_ For reasons of safety the heater block and/or heater sheath must be bonded to earth_x000D_ Approvals_x000D_ UL Recognised; CSA Certified