440F-E000027RS Allen Bradley Guardmaster 0110N Safety Edge Sensor, Protected Area 1.5m, LHT Wire Lead

Safedge Profiles_x000D_ The Safedge pressure sensitive system is supplied in two popular profiles, with cushion factor over travel distances of 5mm and 19mm. The cushion factor is the distance the profile can be depressed after a signal has been generated._x000D_ It is mounted on an aluminium C rail (included) and is supplied in 1, 1.5 and 2m lengths that may be cut and joined in series or parallel to support a wide range of industrial applications such as power operated doors, guided vehicles and moving machinery beds._x000D_ The Safedge profile uses a combination of non-conductive rubber and flexible wire cored conductive rubber bonded together enabling it to return to its original shape even after repeated compressions._x000D_ It has no rigid internal parts to damage the rubber profile or cause fatigue failures after prolonged use. The multi-stranded copper wire core throughout the length of the strip also insures that there are no problems of resistance build up on long lengths._x000D_ A range of accessories for end termination and 90° active corner joints are also available._x000D_ 2 different profile designs_x000D_ Conductive rubber technology_x000D_ Available in 1m, 1.5m or 2m lengths_x000D_ Aluminium mounting rail_x000D_ The system has a bend radius of 200mm_x000D_ Rubber boot optional_x000D_ Active corners_x000D_ IP65 protection_x000D_ Note_x000D_ These Safedge profiles are supplied part assembled. The series terminating resistor and associated end closing cap are not attached to the profile but are supplied separately in a bag. This allows the profile to be cut to the appropriate length before completing the assembly by inserting the resistor and gluing the end cap in place using industrial cyanoacrylate adhesive._x000D_ Allen Bradley Guardmaster Safety Edge Sensor For Safedge Pressure-Sensitive System, 1.5m Protected Area - 440F-E000027RS_x000D_ Improve safety in your work environment using this safety edge sensor from Rockwell Automation's Allen Bradley Guardmaster range. It's designed to send a signal to the control unit if the edge of a machine guard comes in contact with a foreign object. The unit comes with an LHT wire for ease of connection to the control unit. It features an aluminium mounting rail that offers resistance to impact and corrosion, making this a durable choice. You'll typically find safety edge sensors in movable machine guards in applications like revolving doors and conveyor systems._x000D_ Features and Benefits_x000D_ • 1.5m protected area enables multiple cut-and-fix applications_x000D_ • IP65 rating indicates it's protected against dust entry and low-pressure jets of water_x000D_ • Can be mounted in any position for versatile assembly_x000D_ • Corners are also touch-sensitive for added safety_x000D_ Standards and Certifications_x000D_ • CE Marked_x000D_ • cULus_x000D_ • EN 1760-2_x000D_ • ISO 13849-1_x000D_ • AS 4024.5_x000D_ How does a safety edge system work?_x000D_ • IP65 protection_x000D_ A safety edge system features a rubber profile, aluminium mounting rail and a control unit. When the edge comes in contact with a person or object, the rubber profile compresses, causing the control unit to stop or reverse the machine guard._x000D_ Safety Edge