FFSMC10AW Cynergy3 FFSMC Series Cable Mount PE Float Switch, Float, 5m Cable, Direct Load, 250V ac Max, 110V dc Max

FFSMC Series - WRAS Approved_x000D_ Submerged type float switch for sewer and industrial waste systems and turbulent industrial fluids. Self cleaning switching element with 10 amp contacts, this makes the switch insensitive to condensation and humidity caused by fluctuations in temperature._x000D_ Rounded moulding to prevent the accumulation of solids_x000D_ Insensitive to Humidity and Condensation_x000D_ Water Resistant up to a Depth of 100m_x000D_ Switch Horizontal ±15° of Horizontal_x000D_ Fitted with Internal Weight Fixing the Centre of Gravity and Rotation Close to the Cable Entry_x000D_ External Counterweight Supplied to Adjust the Pivot Position_x000D_ WRC Approved PVC Cable_x000D_ Note_x000D_ The Water Fittings Regulations (or by-laws 2000 in Scotland) are national requirements for the design, installation and maintenance of plumbing systems, water fittings and water using appliances. These require that all materials and fittings that will come into contact with supply water should be approved under the Water Regulations Advisory Scheme (WRAS)._x000D_ Sensata Cynergy3 Direct Load Float Switch, 5m Cable Length, 10 Bar - FFSMC Series - FFSMC10AW_x000D_ Need to monitor changes in liquid levels? Choose this float switch from Sensata Cynergy3. It's a submerged-type switch commonly used in reservoirs and with industrial wastewater systems. The body suspends in the water from the sturdy cable while the probe within reads the liquid pressure and converts it to an electrical current. The reading travels up the cable to the switch to activate it when levels rise or fall. This ensures that liquids stay at an appropriate level to prevent underfilling or overflow._x000D_ Features & Benefits_x000D_ • Watertight seal for resistance to humidity and condensation_x000D_ • Rounded design prevents the build-up of solids around the body_x000D_ • Long 5m cable length for an extended reach into large industrial containers_x000D_ • Broad operating temperature range of 0°C to +55°C for use in cold and hot environments_x000D_ What is this float switch made of?_x000D_ The body of this float switch is made of high-density polyethylene (HDPE), which provides excellent electrical insulation for greater safety and resistance to wear. The density of the material also means it can withstand turbulent water currents up to a depth of 100m for use in heavy-duty applications.