RSF43YFP Cynergy3 RSF40 Series Horizontal Nylon Float Switch, Float, NO/NC, 240V ac Max, 120V dc Max

Cynergy3 Horizontal Float Switches_x000D_ Cynergy3 offers wide range of horizontal switches which are WRAS approved and have low-cost compact design. These horizontal float switches consist of a reed switch and a pivoted actuator magnet and can be used for N/O or N/C operation. The switch action can be reversed by mounting the float switch with the float able to move upwards away from the body instead of downwards._x000D_ WRAS approval explained_x000D_ WRAS is the standard against waste, misuse, undue consumption or contamination of the water supply and must have an appropriate quality and standard._x000D_ What materials can you choose from?_x000D_ • Nylon_x000D_ • Polypropylene_x000D_ • Polypropylene Sulfide (PPS)_x000D_ Features and Benefits_x000D_ • Operating temperature: -10 °C to +120 °C_x000D_ • N/O or N/C Switch output_x000D_ • Switch action may be reversed by rotating the switch through 180º_x000D_ • Choice of gasket materials: Silicone, Nitrile, Viton or combination of Silicone & Nitrile_x000D_ • Flying Lead_x000D_ • M12 plug connection_x000D_ • Internal & external fitting inside a tank_x000D_ • UL recognised_x000D_ Typical Applications_x000D_ These Cynergy3 Horizontal Switches are most likely to be used in vending machines, commercial washing machines and evaporator units._x000D_ Note_x000D_ Suitable for signal switching and for use with transistorised input/low power, suppressed coil miniature relays. Not suited for any inductive or inrush (e.g. filament lamps) loads._x000D_ Sensata Cynergy3 Horizontal Float Switch, NO/NC, M12 - RSF40 Series - RSF43YFP_x000D_ Safeguard your liquid container from hazardous overflow using this Sensata Cynergy3 float switch. It carefully monitors levels to keep them within a safe preset range. As the liquid rises or falls, the float on the surface of the liquid uses magnetic force to change the switch position. This sends a signal to switch on or turn off flow. The switch features horizontal mounting, so you can install it in tanks with no vertical access._x000D_ Features & Benefits_x000D_ • Standard M12 mounting thread for compatibility with standard connections_x000D_ • Nylon body material is lightweight and abrasion-resistant, so it's durable and easy to install_x000D_ • Compact design for use with small pumps and setups_x000D_ Is this switch 'normally open' or 'normally closed'?_x000D_ You can set the switch output to either 'normally open' (NO) or 'normally closed' (NC). This gives you flexibility in how you configure your electrical circuit._x000D_ Is the switch durable?_x000D_ The switch connection is insulated with a nitrile-rubber gasket that resists water and oil. This material is strong enough to withstand a build-up of pressure without failing.