510-0565 RS PRO Piston Inline Flow Switch for Liquid, 0.1 L/min Min, 0.6 L/min Max

RS PRO Flow Switch, Max. 0.6 L/min_x000D_ If you need to monitor the flow rate of a low-flow application, turn to this piston flow switch from RS PRO. It's suitable for flow rates between 0.1 and 0.6 litres per minute._x000D_ You can preset the flow rate by moving a reed switch to your desired value. When the flow rate falls outside this value, a piston with a magnet is displaced proportionally to the flow rate and produces a signal. You can install the switch in any position, and it has a 1/4 in BSP connector._x000D_ Part of the RS PRO range, this product is tested for quality and safety. With an IP65 rating, it's protected from dust and water splashes. It also has high pressure capabilities of up to 300 bar and can withstand a maximum liquid temperature of +100°C._x000D_ This flow switch is useful for adjusting the flow rate of medical devices or measuring equipment._x000D_ Features and Benefits_x000D_ • Flow switch for low-flow liquid applications_x000D_ • Minimum flow rate of 0.1 L/min_x000D_ • Maximum flow rate of 0.6 L/min_x000D_ • Supply voltage of 200 V ac_x000D_ • Current rating of 1 A_x000D_ • Pipe diameter range of 1/4 in_x000D_ • 1/4 in BSP connection_x000D_ • Maximum pressure of 300 bar_x000D_ • Nickel-plated brass inline piston_x000D_ • Maximum fluid temperature of +100°C_x000D_ • Maximum operating temperature of +120°C_x000D_ • IP65 rating for protection from dust and water splashes_x000D_ RS PRO_x000D_ RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards_x000D_ they’re only given the RS PRO Seal of Approval if we’re confident of their exceptional quality, which means you can be confident too.