903-3927 RS PRO Through Beam Photoelectric Sensor, Fork Sensor, 30 mm Detection Range

RS PRO Through Beam (Fork) Photoelectric Sensor with Fork Sensor, 30 mm Detection Range_x000D_ This RS PRO through-beam photoelectric fork style sensor is a type of thru-beam sensor where the transmitter and receiver are in a separate housing, facing each other. Through-beam sensors are a reliable way of detecting almost any object, irrespective of its colour or angular motion._x000D_ This device features U-shaped photoelectric sensors with light-emitting diode (LED) indicators to make it easy to use. It has aluminium alloy housing for strength and resistance to corrosion and an Ingress Protection (IP) rating of IP65, which means it's dust-tight and is protected against low-pressure water jets from any direction. It has protection against reverse polarity, meaning that power to the sensitive electronic circuits in the transmitter will be cut in case of incorrect wiring._x000D_ Features and Benefits_x000D_ • Detection range of 30 mm_x000D_ • Through-beam (fork) detection type_x000D_ • 4-wire electrical connection_x000D_ • Cable length of 2 m_x000D_ • Aluminium alloy housing material_x000D_ • Ingress Protection (IP) rating of IP67_x000D_ • Infrared light source_x000D_ • Maximum current of 15 mA (milliamperes)_x000D_ • Maximum DC voltage of 30 V (volts)_x000D_ • Maximum operating temperature of +55°C_x000D_ • Minimum operating temperature of -15°C_x000D_ • Panel mounting type_x000D_ • LED (Light Emitting Diode) optical technology_x000D_ • NPN (Negative Positive Negative) NO/NC (Normally Open/Normally Closed) output type_x000D_ • Response time of less than 1 ms_x000D_ • Fork sensor style_x000D_ • Meets CE (Conformité Européenne) and IEC (International Electrotechnical Commission) standards_x000D_ • Pre-wired terminal type