PAXCDL10 Red Lion Plug-in Card For Use With EPAX Display

PAX I - counter, tachometer, with RS232 option_x000D_ 6-digit, 2 independent counters, 1 total/difference/remote indicator, 1 tachometer_x000D_ Max. 40 kHz, adjustable to all common sensors_x000D_ Plug-in options: 2 or 4 maximum values, analogue output: 0 / 4 → 20 mA, 0 → 10 V, serial interface: RS 232_x000D_ Position display with analogue output_x000D_ Easy to programme on the unit or via PC_x000D_ Min./max. value storage, scalable pulse output_x000D_ Protection class IP65_x000D_ Dimensions: 48 x 96 x 104 mm_x000D_ Red Lion PAX® Extension Analog Card_x000D_ The Red Lion PAXCDL10 series plug-in card is an analogue output card used with EPAX display. The PAX meter can be fitted with up to three option cards such as serial communications, analogue output, and setpoint output. However, only one card from each function category can be installed at a time. The linear DC output plug-in card provides either 20mA or 10V signals. The plug-in setpoint cards provide dual FORM-C relays (5A), quad FORM-A relays (3A), quad sinking, or quad sourcing open collector logic outputs._x000D_ Features and Benefits_x000D_ Terminal block and quick disconnect connector_x000D_ Resolution is 1/3500_x000D_ Response time is 10ms_x000D_ RS232, RS485, Modbus, DeviceNet and Profibus-DP communication interfaces_x000D_ Readout values and setpoint alarm values can be controlled through the bus_x000D_ Applications_x000D_ Use with PAX units_x000D_ Certifications_x000D_ cULus approved_x000D_ CSA Certified_x000D_ CE certified