ATS01N125FT Schneider Electric 11 kW Soft Start, 110 → 480 V, 1, 3 Phase, IP20

Schneider Electric Soft Starters - Altistart 01 Series_x000D_ Created and designed to operate as a torque limiter on starting, or as a soft start or soft stop unit for asynchronous motors. This range of soft starters enhances the starting performance of asynchronous motors by allowing them to start smoothly, gradually and in a controlled manner. They are compact and easy to install, the Altistart 01 series can be mounted side by side._x000D_ Features & Benefits_x000D_ Prevents mechanical shocks_x000D_ Reduces wear and tear_x000D_ Reduces the amount of maintenance work_x000D_ Reduces production town time which in turn keeps production level up_x000D_ Because the Altistart 01 series limits the starting torque and current peas on starting machines which do not require a high starting torque, it is the perfect solutions for applications such as conveyors, pumps, fans, compressors, small cranes, conveyor belts and much more_x000D_ Complies and adheres to IEC/EN 60947-4-2, carries UL, CSA, C-Tick, CCC certifications and e marking_x000D_ There are three ranges that create the Altistart 01 series, these are ATS 01N1, ATS 01N2 and ATSU 01N2_x000D_ ATS01N125FT Soft Starter_x000D_ The main function of this component type is to perform as a soft starter or soft stop for one-phase loads_x000D_ Forms part of the Altistart 01 product range_x000D_ Commonly referred to as ATS01_x000D_ Features a supply voltage of 110...480 V - 10...10 %_x000D_ The starter rating is 25 A_x000D_ Has a utilisation category of AC-53B conforming to EN/IEC 60947-4-2_x000D_ The current consumption is 125 A at nominal load_x000D_ Starts with a voltage ramp_x000D_ Power dissipation - 1 W at full load and at end of starting, 126 W in a transient state_x000D_ Dimensions - H124 mm X W45 mm X D131 mm_x000D_ 1 greed LED will display when the starter is powered up and 1 yellow LED will display when the nominal voltage has been reached