XS7C1A1PBL01M12 Telemecanique Sensors Inductive Block-Style Proximity Sensor, 15 mm Detection, PNP Output, 12 → 24 V, IP67

The Schneider Electric XS series inductive proximity sensor is solely for the detection of metal objects. It basically comprises an oscillator whose windings constitute the sensing face. An alternating magnetic field is generated in front of these windings. When a metal object is placed within the magnetic field generated by the sensor, the resulting currents induced form an additional load and the oscillations cease. This causes the output driver to operate and, depending on the sensor type, a normally open (NO) or normally closed (NC) output signal is produced._x000D_ Detector flush mounting_x000D_ acceptance_x000D_ Flush mountable_x000D_ Material Plastic_x000D_ Enclosure material PBT_x000D_ Type of output signal Discrete_x000D_ Wiring technique 3-wire_x000D_ Discrete output function 1 NC_x000D_ Output circuit type DC_x000D_ Discrete output type PNP_x000D_ Electrical connection 4 pins M12 remote male connector_x000D_ Cable length 0.15 m