NX-CIF210 Omron Communication Module for use with Sysmac Machine Automation Controllers and CJ2-Series PLC's, NX I/O Series

The Omron NX I/O provides simplicity and flexibility in connecting serial devices to EtherCAT. It is mounted to NX-series EtherCAT coupler unit and connect various types of serial devices. The serial line monitor on the Sysmac Studio helps easily and reliably connect serial devices._x000D_ Just 12 mm wide, saving space in your cabinet._x000D_ Three models are available with a choice of one RS-422A/485, one RS-232C, or two RS-232C ports._x000D_ Screwless push-in terminal block (1-port model) and D-Sub connector (2-port model) significantly reduce wiring work._x000D_ No-protocol communications are supported as the communications protocol._x000D_ The maximum baud rate is 230.4 kbps. The baud rate can be selected to match the connected serial devices._x000D_ The settings are backed up and saved in the EtherCAT Coupler Unit. This facilitates commissioning and maintenance._x000D_ The serial line monitor enables you to check the communications status with serial devices on the Sysmac Studio for easy and reliable startup_x000D_ of the devices.