QM-211-1REL Simex ProSens 200 LCD Digital Panel Multi-Function Meter for Humidity, Temperature

ProSens Digital Universal Meter_x000D_ The ProSens multi function universal meter and controller has an intelligible display and is built in a closed-in tight housing. It can be used in many industrial applications as a standalone device or, thanks to its built-on RS-485 Port and Modbus protocol, it can be part of a bigger net of devices. The meter can be equipped with up to two universal measurement inputs, one digital sensor input and also up to two control outputs._x000D_ Features and Benefits_x000D_ Large, clear 2.9” graphic LCD display_x000D_ 1 or 2 measuring channels available, with or without probe_x000D_ Integrated or cable probes made of 316L steel, used to measure temperature or temperature and humidity_x000D_ Replaceable filter made of PTFE or 316L mesh, 25 μm_x000D_ Binary and analogue outputs for indication and controlling_x000D_ Indication of 1, 2 or 4 parameters on one screen_x000D_ Individual descriptions of measuring channels_x000D_ Optional elaboration of personalised graphic units, displayed at measurements_x000D_ RS-485 Modbus RTU interface for integration with superordinate visualisation or control systems_x000D_ Device configuration performed by local buttons, optional remote controller or free S-config 2 software_x000D_ IP67 (without display) or IP65 (with display)_x000D_ Digital industrial meters constitute the largest family of automation equipment, ranging from the simplest meters that are designed only to display basic parameters such as working states or physical quantities (temperature, level, pressure etc.), to more complex control units having a number of relay outputs. Depending on the type of signal measure or sensor used, the equipment can have inputs for current, voltage, millivolts or even be adapted to suit an RTD temperature sensor or thermocouple._x000D_ 2 or 2 measuring channels available, with or without a probe_x000D_ Integrated or cable probes made of 316L steel, used for temperature or temperature and humidity measurements_x000D_ Replaceable filter made of PTFE or 316L mesh, 25 μm_x000D_ Universal inputs of a very wide s spectrum of analogue signal types (I, U, RTD, TC)|•Binary and analogue outputs for indicating and controlling (1 or 2 E REL, I, U)|•Very clear 2.9’’ LCD display|•Indication of 1, 2, or 4 parameters on one screen|•Individual descriptions of measuring channels 3|•Optional elaboration of personalised graphic units, displayed at measurements (e.g.: m , l/h, kPa, °F, etc.) Standard equipment: RS-485 Modbus RTU interface for integration with superordinate visualisation or control systems Device configuration performed by means of local buttons, optional remote controller or free S-Config 2 software|•Operating temperature: -30°C ÷ +80°C|•IP rate protection: IP 67 (version without display), IP 65 (version with_x000D_ ProSens is a new line of modern industrial instruments, which integrates sensors, converters, meters and controllers functionalities. Using the latest miniaturisation technologies these compact instruments are able to be equipped with one independent universal input, two binary or two analogue outputs, as well as communication port RS-485 with Modbus protocol. Model QM-211 has integrated radial temperature or temperature and humidity probe, Ø 18 mm, L=40 mm, PTFE filter cap. A large built-in display and output signals mean that the ProSens line units find applications in control systems. There are many industrial applications, where ProSens can act as stand-alone controller. It can also cooperate with master devices via Modbus protocol, being part of big network, which makes it perfect instrument for distributed monitoring system._x000D_ Simex Multi function Meters